Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-14-2016, 01:27 PM   #1
Weekend Camper
 
Join Date: Jan 2015
Location: PA
Posts: 40
Furnace work Intermittently?

sunset trail 290QB thermostat is set to auto woke up this AM with cool camper, fan running but heater was not firing. Check propane good there stove and hot water work fine on gas. turned unit off and it fired and worked for a few cycles then stopped igniting again. looking for some help. Read some other threads on here and other sites found some possible solutions with air flow. On this model I can not find out how to access the furnace to make sure not webs or anything interfering with airflow. vent cover inside if removed does not give you access. no access on out site either.

How do you access it or any other thoughts or solutions to this problem?
__________________
Northeast PA
2014 RAM 1500
2015 290QB
jsd493 is offline   Reply With Quote
Old 05-15-2016, 02:33 PM   #2
Weekend Camper
 
Join Date: Jun 2015
Location: Southern califorina
Posts: 39
You will have to pull it out from in side. Lay some cardboard on the floor to protect it. Put mine on the workbench. To fix airflow switch. Just needed some lubercant.
Randy68 is offline   Reply With Quote
Old 08-19-2019, 01:56 PM   #3
Weekend Camper
 
Join Date: Jan 2015
Location: PA
Posts: 40
looking for more info about removing the furnace on this model. anyone ever remove it and have some pointers? Looks like I have to disconect the duct work that is in the front to get it out. Then as I disconect stuff is there anything I need to be careful of I don't wont to kink or rip any wires or propane lines.
__________________
Northeast PA
2014 RAM 1500
2015 290QB
jsd493 is offline   Reply With Quote
Old 08-22-2019, 09:24 AM   #4
Seasonal Camper
 
Aceallenk's Avatar
 
Join Date: Jul 2017
Location: Saskatchewan
Posts: 417
Just incase you have to replace your circuit board there is a highly rated USA built circuit board that replaces boards in all RV furnaces, water heaters, and the fridge. I had trouble last week with my water heater and stumbled across these boards and after a few hours of reviews and Utube vids the choice became quit obvious for myself. No more Chinese built boards that have a lifespan as long as a mosquito. This might not be your issue, but if it is, don't let a service man replace your board with more garbage. Dinosaur provides warranty for 3 years, that in itself is enough reason as to the hardware they use in there boards. (https://www.dinosaurelectronics.com/) Just saying but the choice is your !!
__________________
2011 ST25RB SunSet Trail - RESERVE
Silverado LT Z71
Aceallenk is offline   Reply With Quote
Reply

Tags
furnace, ignites intermittently

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Crossroads RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 09:15 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×