While backing the 5er up onto some 2x8s, the top 2x8 lifted up and before I knew it there was a crunch. Has anybody ever removed dents with a heat gun and pressure on the dent? My pics are from photobucket- probably won't load
__________________
Don & Brooksy
2009 Crossroads Cruiser, CF32BLT
2018 Ford F350 4x4 diesel,Curt Q20K slider.
You might try taking the pictures to a body shop. They may steer you to a good solution. I had a body shop fix a dent in my truck and they did a great job for less than 100 $.
Good luck getting that back like new. My suggestion - smooth it out as best you can and put a sticker over it. Perhaps a rating sticker or information sticker that would still look official and not draw attention to the panel deformation issue