I have a 2012 335SS and the board where the dump valves and low point drains are located was loose and flopping at the top.
I toured the factory about two weeks ago and the man giving the tour said to bring it to the factory and they would fix it.
Yeah right, just break camp and leave the trailer and sit in the campground until it was fixed.
The installer of that board had just barely caught the edge of the brace and broke the screws off. I pulled the board loose,applied wood glue to the brace, put it in place and brad nailed it.
One thing I did notice in that tour, apparently there is no quality control, just left up to the workers to build it right.
And now I have a water leak.
|