After reading several posts about how an accumulator tank can help reduce the number of times the water pump runs, I decided to install one this weekend.
I am VERY VERY</span> glad that I did. Found that the hose coming out of the water pump was leaking (dripping) under pressure.
I changed out the hoses and added the accumulator tank. Everything is working great not and the water will run for about 12 seconds before the pump engages.
Here is a picture of the final installation. No leaks after 24 hours of being pressurized too.
This mod should have taken about 20 minutes. I would recommend always getting 2 of the flexible hoses when at the hardware store. You can always return one.