Hi to all Crossroads people.
Four weeks ago I de winterised our 2009 - 29ck Cruiser 5th wheel. The hot water tank worked fine on both gas and electric. We were not going to use it right away so all water was drained and the hot water tank shut off and the unit put back in storage.
Today I am getting it ready for a trip day after tomorrow. The HWT will not work on elecrtic and / or gas.
The 2 amp fuse is okey, the thermostat (an add on) is fine. I cleaned all the contacts, adjusted the ignition points at 1/4 inche as per Atwood, cleaned out all the tubes( they were clean to start)
The HWT starts then shuts off. It does this the 3 times and then then I reset it. This was done over a 20 min. period. Sometimes there is a big "poof" like it is back firing. I did adjust the air but still the same. Sometimes it doesn't even fire up. Just shuts down. All other gas appliances work fine and the tanks are full.
All breakers and fuses are okey.
I am thinking the problem might be with the control board as it does not operate on electric or gas
Our Crossroads dealer is 6 hours away. I will be calling them for suggestions tomorrow in the morning.
Is there anything else I could try in the mean time?
__________________
mitzy
2009 CF29CK
Prince Albert SK.
|