07 Zinger 32qb bathtub issue

[jj49ersrule]

Hi i was wondering if anyone has had the same issue i have. My bathtub floor feels like it is missing a support on one side. I was showering and the tub developed a small crack. Whats the best way to repair this?

[harley]

try opening the access door (if you have one.) and add some support underneath. i had to this to my shower.

[jj49ersrule]

Originally Posted by harley

try opening the access door (if you have one.) and add some support underneath. i had to this to my shower.

Not sure if mine has an access door but if i did where would it be? Thanks Harley

[harley]

mine is in front along the floor that gives access to the trap .

[jj49ersrule]

Originally Posted by harley

mine is in front along the floor that gives access to the trap .

What year and model trailer do you have?

[Lloyd]

It's posted right in his sig.
2013 Sunset Trail Reserve 25RB..

If you post that info in your sig. everybody will know what make, model and year rig you are asking questions about.

[fhenn]

I had that problem on our Zinger, Drilled some holes under the bottom of the tub and filled the void with spray foam

[jj49ersrule]

Originally Posted by fhenn

I had that problem on our Zinger, Drilled some holes under the bottom of the tub and filled the void with spray foam

How did you fix the holes?

[fhenn]

rubber plugs this was done out side of the tub below the floor of the tub. it was a rear bath Zinger

[Tim D]

Look at your shower tub. Mine is in front too. Harley and I have same TT. Should see a panel with four screws, one in each corner. The front (in front of the drain) has no support. I stuck a 2x4 in there and wedged it and has held fine. I would not do expanding foam. That is your access to water and drain lines. If you have a problem you will never get to them!

[ewbldavis]

My 32QB has access panel on outside wall of bathroom, and on side of tub (facing the toilet).