|
|
07-05-2012, 12:27 PM
|
#21
|
New Camper
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 7
|
I noticed my was sagging a few weeks back also. At first I was not sure what it was as I had already emptied the fresh task. I thought it had a leak and I had water trapped in the underliner. AsI checked it more closelyI found the same thing you guys did, that it was the tanks itself. So I opened the drian valve again and nothing. I am just wondering how you guys plan on removing the underliner? Is it screwedon or rivets? I did not look close enough and it is not parked at my house but out at my campsite so I cannot go look at it.
|
|
|
07-05-2012, 01:25 PM
|
#22
|
Full Time Camper
Join Date: Apr 2006
Location: 1
Posts: 2,036
|
The liner is held up with metal strips and screws that are screwed into the frame at the perimeter on the membrane. It is pretty easy to take down, but a second person would be helpful when putting it back up (in order to get it tight).
|
|
|
07-06-2012, 01:52 AM
|
#23
|
Weekend Camper
Join Date: Jan 2011
Location: Alliance, Ohio
Posts: 96
|
Quote:
Originally Posted by Old Farmer
I'm not being critical so don't take me wrong.
I think I would have left the straps on and just placed the reinforcements directly over them, or if you wanted to remove them, then you need quite a bit heavier support pieces.
Your angle iron isn't heavy enough to do the job.
|
The existinggalvanizedstraps were very very thin, probably 16gauge. No rigidity at all.
The angle iron, although not heavy enough, is certainly more rigid than the straps were. Will most likely pull the angle iron off and just put the straps back on as I don't see much of a difference.
I only have maybe 1/4 of a tank when traveling and only fill up when we arrive.
__________________
2012 Ford F-350 Lariat 4x4 6.7L PSD
2012 Zinger ZT26BH
|
|
|
07-06-2012, 02:48 AM
|
#24
|
Seasonal Camper
Join Date: Aug 2006
Location: Indiana
Posts: 336
|
Quote:
Originally Posted by daystrom
The existinggalvanizedstraps were very very thin, probably 16gauge. No rigidity at all.
The angle iron, although not heavy enough, is certainly more rigid than the straps were. Will most likely pull the angle iron off and just put the straps back on as I don't see much of a difference.
I only have maybe 1/4 of a tank when traveling and only fill up when we arrive.
|
It's not so much the straps or your angle iron. The tank itself is very flimsy, more like a bladder. It simply needs something stronger to set on.........like 3/4" plywood. It appears your tank is located at the rear of your trailer, dropping the membrane to expose the tank is not that bad if you just drop enough to expose the tank.
|
|
|
07-06-2012, 03:41 AM
|
#25
|
Weekend Camper
Join Date: Jan 2011
Location: Alliance, Ohio
Posts: 96
|
Problem is the tank is directly above the axles. No room to work
__________________
2012 Ford F-350 Lariat 4x4 6.7L PSD
2012 Zinger ZT26BH
|
|
|
07-06-2012, 03:51 AM
|
#26
|
Full Time Camper
Join Date: Apr 2011
Location: Canton, OH
Posts: 937
|
Quote:
Originally Posted by daystrom
Problem is the tank is directly above the axles. No room to work
|
Bummer...at least weight is distributed!
__________________
Eddy & Brenda
Canton, OH
2015 Silverado HD 6.0L
2014 Zinger 32QB
|
|
|
07-06-2012, 08:43 PM
|
#27
|
New Camper
Join Date: Jul 2012
Location: HOUSTON, TEXAS, USA. 281 82
Posts: 4
|
Dear ewbldavis
I think you should consult a experienced Water Tank Expert
cheers
|
|
|
07-22-2012, 06:11 PM
|
#28
|
New Camper
Join Date: Jul 2012
Location: HOUSTON, TEXAS, USA. 281 82
Posts: 4
|
Dear ewbldavis
To
determine if your rain gutters sag, check for signs of standing water
or water marks along the inner sides of the gutters. With a level,
check the slope—gutters should drop about 1/4 inch for every 10 feet of
run toward the downspouts.
</span>
To resolve , you may need to replace the hangers or, at the very least</span>,
reseat them. If the gutters are held by spike-and-ferrule hangers, use
a hammer to drive the long spike, making sure it goes into solid wood.
If it does not grab securely, you may need to replace it with an even
longer galvanized nail or a long screw.
</span>
thanks
</span>
</span>
</span>
|
|
|
07-23-2012, 12:18 AM
|
#29
|
Full Time Camper
Join Date: Dec 2007
Location: Breckenridge,CO
Posts: 975
|
Hmmmmm.
Edited by: coastn
__________________
CAMPGROUND "DRIVEWAY"
Breckenridge, CO
'08 Crossroads Sunset Trail ST30BH Traded
'21 Grand Design Reflection 31MB 5er
'22 Cougar 29RLI 5er
'23 RAM 2500 4X4 CTD
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|