There should be a hole on the opposite side of the trailer that your crank and extension the trailer came with will go through and you can manually crank the slide in. Look opposite side to the slide you want to bring in and approximate location will line up with one of the slide rails on the opposite side. Either an obvious hole or a hole with a rubber cover over it (about 1 1/2" in diameter). Hope this helps.
__________________
Scott
2013 CrossRoads Cruiser Patriot CF345RF
2011 Ford F350 Lariat FX4 CC 6.7L Turbo Diesel (Heavily Modified)
Saskatoon, SK
|