wardrobe door guides

[87_Fixer]

Any body got some advice for some pinhead that can't get the br wardrobe sliding door hangars installed without falling out? I'm starting to get foul mouthed !hHelp pls.

[dagst1]

Not sure what you are working with but do the top ones look like these -- https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

And the bottom like these -- https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

This is what fit our camper.

[87_Fixer]

Yes.Those are the hangar guides. The lh door slides but the rh door is giving me fits.The top bracket keeps falling out of the door.. 'Im not sure if I'm supposed to adjust it cw or ccw.🙄cw is bringing the door up higher, which seems right. But when I push the bottom guide back down into the track, the top hangar falss out of the door again.☹️3 hrs of working with it and I,'m still at the same place_ nowhere. Pretty frustrating.

[dagst1]

Falling out of the door or the track at the top. On my top ones the small tab goes in the upright and then the whole thing rotates to the side towards the side door frame and fits in a slot and snaps in and you have to put a screwdriver in the upright and push that tab to remove it so i am guessing the wheel is not staying in the track.

To install the door swing the bottom out and hook the wheel in the rail then swing the door back to normal position then push the bottom guides down into the slot in the track. They will snap in. Then you can adjust the door for square and height with the screw.