|
|
01-15-2018, 02:44 PM
|
#1
|
Seasonal Camper
Join Date: Jan 2017
Location: Florida
Posts: 389
|
Who's lubed their slide mechanics ?
I tried to avoid the obvious double entendres and this is the best I could do.
I'm seriously interested in what product, and the application thereof, any of you have used to lubricate the mechanical components of your slide outs.
Under mine, I think it's an LCI system are two square metal gear tracks that run across the chassis, one of which has a screwjack in a round tube attached to it. And a drive shaft running between the two tracks running fore and aft with a pinion at each end engaged in the tracks presumably to keep the assembly moving squarely when the screwjack does all the work.
Everything seems to be devoid of grease, and being old school ( If it moves grease it, if it doesn't move paint it, and if you can't grease or paint it polish it!) I'm tempted to slather it on all the matting surfaces.
Here's your opportunity to lead me in the right direction please, or if nothing else add some humor by describing your preferred method of lubrication......... There, I've opened the door for you....
__________________
Biggles
2015 Toyota Tundra Dbl Cab 5.7 V8
2017 Zinger Z-1 291RL "Harvey'
|
|
|
01-15-2018, 03:02 PM
|
#2
|
Site Team
Join Date: Dec 2007
Location: WI.
Posts: 9,163
|
It doesn't need grease.
When you are moving down the road, it's not subject to any road grime because it's retracted. If you do (slather) grease all over it, be prepared for a mess inside on the floor/carpet.
When you have the slide out, look it over and see if there is any dirt, sand, crud in the splines. If there is wire brush it out. They use to have an aerosol for spraying on the splines, but I really don't think it's necessary. After all, it's not a high speed mechanism by any means.
|
|
|
01-15-2018, 03:48 PM
|
#3
|
Family Vacation Member
Join Date: Feb 2016
Location: ky
Posts: 120
|
Lci states wash with soap and water only.
__________________
Jim & Susie, 2014 Redwood 36 FL, 2012 F-250 6.2, Trailer Saver TS3,MORryde I.S. with disc brakes
|
|
|
01-15-2018, 05:49 PM
|
#4
|
Weekend Camper
Join Date: Dec 2016
Location: South Carolina
Posts: 46
|
I use a dry spray-on graphite. Just a light coat on the gear teeth.
__________________
Tom and Lori
1996 F250, 7.3L, TS chip, 4" exhaust, EBP delete
2012 Cruiser 335SS
|
|
|
01-15-2018, 06:37 PM
|
#5
|
Site Team
Join Date: Sep 2012
Location: PA
Posts: 5,724
|
I use a dedicated product. Spray about twice a year after cleaning it.
https://www.amazon.com/Premium-RV-Sl.../dp/B000TRBIG4
__________________
Mark & Susan
Lehighton, Pennsylvania
EAGLE HT FIFTH WHEEL | 30.5CKTS - '13 Ford F150 SCREW - PullRite Superslide - Roadmaster Active Suspension
Member - "Northeast Adventures RV Rally Group" & "Mason-Dixon Bunch"
|
|
|
01-15-2018, 06:43 PM
|
#6
|
Full Time Camper
Join Date: Oct 2012
Location: Saskatchewan
Posts: 844
|
I use the same product as Mark5W. I usually only do one month long trip per year and lube it before I go.
__________________
Scott
2013 CrossRoads Cruiser Patriot CF345RF
2011 Ford F350 Lariat FX4 CC 6.7L Turbo Diesel (Heavily Modified)
Saskatoon, SK
|
|
|
01-15-2018, 07:00 PM
|
#7
|
Site Team
Join Date: Dec 2007
Location: WI.
Posts: 9,163
|
Quote:
Originally Posted by mark5w
|
Quote:
Originally Posted by WildWildWest
I use the same product as Mark5W. I usually only do one month long trip per year and lube it before I go.
|
Why do you guys do it?
It's not necessary. I've had a can of that stuff sitting on the shelf for years.
|
|
|
01-15-2018, 07:13 PM
|
#8
|
Site Team
Join Date: Sep 2012
Location: PA
Posts: 5,724
|
Habit
__________________
Mark & Susan
Lehighton, Pennsylvania
EAGLE HT FIFTH WHEEL | 30.5CKTS - '13 Ford F150 SCREW - PullRite Superslide - Roadmaster Active Suspension
Member - "Northeast Adventures RV Rally Group" & "Mason-Dixon Bunch"
|
|
|
01-15-2018, 08:53 PM
|
#9
|
Gone Traveling
Join Date: Feb 2016
Location: Texas
Posts: 1,392
|
20161005_120522.jpg
I've used this for years on the hydraulic slides, Schwintech slide motors & gears (recommended regularly), door locks, hinges, if it moves it gets sprayed. It has the same ingredients ( Ceflon/Teflon) as the higher priced sprays for about a 1/3 of the price from Wal-Mart. DO NOT use regular WD40, it's a dirt/dust magnet, but they do make a silicone spray that can be used.
While speaking of slides, the factory service center recommended using Pledge furniture polish on all of the slide seals & any other weather seals throughout your rv, dirt doesn't stick & is much cheaper (I buy the imitation at dollars stores) than the dedicated seal conditioners from rv stores.
|
|
|
01-16-2018, 06:30 AM
|
#10
|
Site Team
Join Date: Dec 2007
Location: WI.
Posts: 9,163
|
Quote:
Originally Posted by superduty glampers
Lci states wash with soap and water only.
|
Probably the best answer on here.
Just because a person gets in the habit of doing the same thing for years, doesn't mean it's right.
|
|
|
01-16-2018, 09:14 AM
|
#11
|
Gone Traveling
Join Date: Feb 2016
Location: Texas
Posts: 1,392
|
Doesn't mean it's wrong either!
|
|
|
01-16-2018, 11:28 AM
|
#12
|
Site Team
Join Date: Dec 2007
Location: WI.
Posts: 9,163
|
I didn't say it made it wrong! I said it didn't mean it was right.
Now, if you want to start arguing, this not the place to be doing it.
|
|
|
01-16-2018, 12:10 PM
|
#13
|
Full Time Camper
Join Date: May 2011
Location: So. Cal.
Posts: 577
|
There's nothing wrong with disagreement here. Argument is a whole different issue. No mudslinging that I've seen.
I like the fact that there can be several answers and the forum members agree.
I don't enjoy the fact that intimidation was even introduced.
__________________
Bob and Better Half
2007 F-250 PSD, SW, CC, LB, 2WD
2006 TF32SS Cross Terrain Toy Hauler (sold)
Reese 16k slider
|
|
|
01-16-2018, 04:54 PM
|
#14
|
Family Vacation Member
Join Date: Sep 2012
Location: Ontario Canada
Posts: 200
|
Based on the original question asked, it sound's like a traditional under floor slide mechanism. Lubing will not get anything on the inside of the trailer. It is underneath the trailer, and if not enclosed it will be subject to road spray.
Wire brushing of rusted parts is probably a good idea, and use an approved lubricant.
The wrong type of lube may attract dirt and grit, which would be undesirable.
Just my personal opinion of course.
__________________
2012 Z1 271BH
2009 F150,4.6 3V. 3.73LS,9.75"
|
|
|
01-16-2018, 05:12 PM
|
#15
|
Family Vacation Member
Join Date: Feb 2016
Location: ky
Posts: 120
|
Quote:
Originally Posted by hippy45
Based on the original question asked, it sound's like a traditional under floor slide mechanism. Lubing will not get anything on the inside of the trailer. It is underneath the trailer, and if not enclosed it will be subject to road spray.
Wire brushing of rusted parts is probably a good idea, and use an approved lubricant.
The wrong type of lube may attract dirt and grit, which would be undesirable.
Just my personal opinion of course.��
|
Like I said,there is no approved lubricate. Soap and water is what is recommended in the LCI master owner manual,but it's your camper spray what you like.
|
|
|
01-16-2018, 08:05 PM
|
#16
|
Seasonal Camper
Join Date: Jan 2017
Location: Florida
Posts: 389
|
Sorry guys, I didn't intend to open a can of worms, just an innocent question from someone who generally didn't know the answer, but trusts and respects your guidance based on experience.
My mechanism is not grimy or cruddy, but it sounds 'dry' if that makes any sense to you engineering types.
I doubt a few microns from a spray can is going to change that so I guess I'll leave it dry per LCI's instructions, and keep an eye out for any abnormal wear on the gears or tracks.
Thanks everyone for the heads up, and making me read through the ton of Lippert paperwork I'd consigned to the 'Save for the next owner' file.
__________________
Biggles
2015 Toyota Tundra Dbl Cab 5.7 V8
2017 Zinger Z-1 291RL "Harvey'
|
|
|
01-16-2018, 08:17 PM
|
#17
|
Gone Traveling
Join Date: Feb 2016
Location: Texas
Posts: 1,392
|
Quote:
Originally Posted by Lloyd
I didn't say it made it wrong! I said it didn't mean it was right.
Now, if you want to start arguing, this not the place to be doing it.
|
Not arguing, stating my opinion like everyone else on here. I apologize if it doesn't agree with yours.
|
|
|
01-16-2018, 10:03 PM
|
#18
|
Weekend Camper
Join Date: May 2017
Location: Tennessee
Posts: 64
|
Scwintech, among others , does have a video on lubricating their slide mechanisms.
How To Lubricate The Schwintek In-Wall Slide-Out System
__________________
Don & Brooksy
2009 Crossroads Cruiser, CF32BLT
2018 Ford F350 4x4 diesel,Curt Q20K slider.
|
|
|
01-17-2018, 04:23 PM
|
#19
|
Weekend Camper
Join Date: Dec 2016
Location: South Carolina
Posts: 46
|
I use a little lube on mine because I don't like metal on metal contact without some type of lube. It is the same reason we all put oil in an engine, to lubricate the moving parts. Granted an engine and a mechanical slide unit are two different things and the amount of lube used between these are proportional. The spray on dry graphite works well and is not a dirt magnet. To each his own.
__________________
Tom and Lori
1996 F250, 7.3L, TS chip, 4" exhaust, EBP delete
2012 Cruiser 335SS
|
|
|
01-17-2018, 04:56 PM
|
#20
|
Site Team
Join Date: Jun 2015
Location: mo
Posts: 2,110
|
I lube mine with Slide out lube from Walmart. It seems to help it from squeaking when opening the slides. The arms are under the slide and I spray where the tubes slide into each other.
__________________
2009 Seville VF32KS
2019 GMC Sierra 3500HD Crew Cab Denali.
6.6 Diesel standard box.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|