Dometic 320 toilet Install

[Camping2020]

Hello all I have a 2020 sunset trail 253rb and want to replace the dumb Thetford toilet that came with camper. It's a corner toilet. My question is has anyone installed a Dometic 320 in this camper and have enough room between the back wall and toilet? My bolts on the Thetford are 10.5" from the wall and the new toilet they are 10.75". I'm worried it's going to be too tight to the wall and leak at the seal.

[robert66r]

I installed a that toilet in my zinger works great.

[Wingerdinger]

Originally Posted by Camping2020

Hello all I have a 2020 sunset trail 253rb and want to replace the dumb Thetford toilet that came with camper. It's a corner toilet. My question is has anyone installed a Dometic 320 in this camper and have enough room between the back wall and toilet? My bolts on the Thetford are 10.5" from the wall and the new toilet they are 10.75". I'm worried it's going to be too tight to the wall and leak at the seal.

The installation instructions will have the clearances. You can download the manual and determine if it will fit. Where did you get the 10.75 measurement?
We are talking about 1/4". I can't imagine that would be a problem.
FYI, the Dometic 320 and the Thetford Style II have very similar and just as unreliable flush valves. You are probably wasting your time and money replacing a toilet that just needs a flush valve.

[robert66r]

I bought this unit brand new about a week old. The Thetford toilet failed that could not be repaired and replaced with a new toilet. The Dometic toilet has done the job just great! Bolted right in no leaks or problems.