Quote:
Originally Posted by The Lone Ranger
It appears my slide is a Schwintek with worm gears. I viewed a youtube video by MyRVWorks.com and it seems a bit complex. I was hoping for a simple adjustment option to tilt the room down at the back so the screw on the front rail is not digging into the linoleum.
|
I had a Schwintek slide in my previous camper, and the slide had floor rollers to support the inner slide floor.
There have been reports of these rollers sagging or failing, and causing problems. Check to see if the slide goes in all the way, square to the outside wall, that may be a clue that a roller has failed.
You are going to have to inspect the underside of the slide to see why there is a screw protruding or roller broken.
There is also a repair available that amounts to a metal 'ski' on each side for the floor roller to ride on so it doesn't sink into the slide floor.